KALA APPLIKATOR
Since the introduction of the AppliKator on the market, KALA has set itself apart by being the first manufacturer to use electric motors to control the elevation and pressure of the roller.
A design focused on safety
The up, down and pressure cycles of the roller are controlled by stepper motors, powered by low voltage. These operations are synchronized with extreme precision by a specially developed electronic control.
This technology allows the integration of a laser safety cell, which automatically slows down the descent of the roll as soon as an obstacle is detected, whether it is the hand of an operator, a tool, or the most fragile supports:
the featherboard will not be crushed,
you will not have any sick leave linked to the use of your working tools.
- Adhesive application, lamination up to 65 mm (2 1/2”) thickness
- Working width 170 cm (67”), working length 311 cm (10′ 3″)
- Roller descent controlled by two electric motors and secured by laser cell
- Application pressure adjustable from the control panels on each side of the machine to pre-set levels
- Parallelism of the roller with the table regardless of the position of the support on the surface
- Assembled on site in a few hours by a technician, it can be easily integrated into any configuration, regardless of access.
- Delivered with self-leveling castors
- Available in an economical version with wood or laminated glass work surface for perfect backlighting.
- Optional LED lighting system
- Phthalate-free antistatic PVC mat, 4 mm thick and cut to length included with the machine
- Adjustable height at installation 85/95/105 cm (33 1/2’/37 1/2’/41”)